c2c3ca4ef2 | ||
---|---|---|
.vscode | ||
CMSIS | ||
cmake | ||
n32g430_std_periph_driver | ||
source | ||
.clang-format | ||
.gitignore | ||
CMakeLists.txt | ||
README.md | ||
n32g430_flash.ld | ||
project.cmake | ||
startup_n32g430_gcc.s |
README.md
1、功能说明
/* 简单描述工程功能 */
这个例程配置并演示bitband位带操作
2、使用环境
软件开发环境:KEIL MDK-ARM V5.34.0.0
IAR EWARM 8.50.1
硬件环境:基于评估板N32G430C8L7-STB V1.0开发
3、使用说明
/* 描述相关模块配置方法;例如:时钟,I/O等 */
SystemClock:128MHz
USART:TX - PA9,RX - PA10,波特率115200
/* 描述Demo的测试步骤和现象 */
1.编译后下载程序复位运行;
2.对32位数据的不同位进行置1置0操作,再读取写入值与读取值,查看打印信息;
4、注意事项
-
Function description /* A brief description of the engineering function */ This routine configures and demonstrates the bitBand bitband operation
-
Use environment
Software development environment: KEIL MDK-ARM V5.34.0.0 IAR EWARM 8.50.1 Hardware environment: Developed based on the evaluation board N32G430C8L7-STB V1.0
-
Instructions for use
/* Describe the related module configuration method; For example: clock, I/O, etc. / SystemClock: 128MHZ USART: TX-PA9, RX-PA10, baud rate 115200 / Describes the test steps and symptoms of Demo */
- Reset and run the downloaded program after compilation;
- Set 1 to 0 for different bits of 32-bit data, read the write value and read value, and view the printed information.
-
Precautions None