2024-07-25 14:50:08 +08:00
|
|
|
|
1. 功能描述
|
2024-07-25 14:49:03 +08:00
|
|
|
|
|
2024-07-25 14:50:08 +08:00
|
|
|
|
1. IO控制LED闪烁
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. 使用环境
|
|
|
|
|
|
|
|
|
|
|
|
软件开发环境:KEIL MDK-ARM V5.34.0.0
|
|
|
|
|
|
IAR EWARM 8.50.1
|
|
|
|
|
|
硬件环境:基于N32G430C8L7-STB V1.0评估板开发
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.使用说明
|
|
|
|
|
|
|
|
|
|
|
|
/*描述相关模块配置方法;例如:时钟，I/O等*/
|
|
|
|
|
|
SystemClock: 128MHz
|
|
|
|
|
|
GPIO: PA1、PA7、PA9控制LED (D1、D2、D3)闪烁
|
|
|
|
|
|
|
|
|
|
|
|
/*描述Demo的测试步骤和现象*/
|
|
|
|
|
|
1. 编译完成后，下载程序复位并运行;
|
|
|
|
|
|
2. LED (D1, D2, D3)闪烁;
|
|
|
|
|
|
|
|
|
|
|
|
4. 注意事项
|
|
|
|
|
|
无
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1. Function description
|
|
|
|
|
|
|
|
|
|
|
|
1. This example shows the IO control LED blinking
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Use environment
|
|
|
|
|
|
|
|
|
|
|
|
Software development environment: KEIL MDK-ARM V5.34.0.0
|
|
|
|
|
|
IAR EWARM 8.50.1
|
|
|
|
|
|
Hardware environment: Developed based on the evaluation board N32G430C8L7-STB V1.0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Instructions for use
|
|
|
|
|
|
|
|
|
|
|
|
/* Describe related module configuration methods; for example: clock, I/O, etc. */
|
|
|
|
|
|
SystemClock：128MHz
|
|
|
|
|
|
GPIO: PA1, PA7, PA9 control LED (D1, D2, D3) to blink
|
|
|
|
|
|
|
|
|
|
|
|
/* Describe the test steps and phenomena of the Demo */
|
|
|
|
|
|
1. After compiling, download the program to reset and run;
|
|
|
|
|
|
2. LED (D1, D2, D3) flashes;
|
|
|
|
|
|
|
|
|
|
|
|
4. Matters needing attention
|
|
|
|
|
|
none
|
